Skip to content
Menu

How Copy Trading Works: The Mechanics Step by Step

By Chad Smith, Director of Research & Analysis · Updated

On this page
  1. The parts of a copy trading system
  2. Step 1: Linking the accounts
  3. Step 2: Choosing a sizing mode
  4. Step 3: How orders are copied
  5. Step 4: Why your fills differ
  6. Step 5: Joining while trades are open
  7. Step 6: Risk settings you control
  8. Step 7: Margin and leverage
  9. Step 8: Fees and how they are charged
  10. Step 9: Monitoring and stopping
  11. A full example
  12. Key takeaways

Copy trading links your account to another trader's, so that when they open, adjust or close a position, a matching order is sent to your account automatically. The size of each copied trade depends on your allocation and sizing settings, and your broker executes it at the price available when it arrives. This guide explains the mechanics step by step: how accounts are linked, how sizing works, how orders flow, why results differ from the provider's, and which settings control your risk.

For the bigger picture, including how to choose providers and costs, read our copy trading guide. See also copy trading and social trading in the glossary.

The parts of a copy trading system

Every copy trading setup has the same building blocks:

  • Provider account: the account whose trades are copied. Also called the master, strategy or lead account.
  • Follower account: your account, which receives copied trades.
  • Copy engine: software that watches the provider's account and sends orders to followers. It may run at the broker, on a platform such as cTrader or MetaTrader, or at an independent service.
  • Settings: your allocation, sizing mode and risk limits.
ExampleProvider10,000 accountbuys 1.0 lotCopy platformscales byaccount sizeFollower A1,000 gets 0.10 lotFollower B5,000 gets 0.50 lotFollower C20,000 gets 2.00 lotsFees: performance share,subscription or wider spreadsFollowers also face delays and slippage on each copied trade.
A copy platform repeats the provider's trade in every follower account, usually scaled to account size, so followers share both gains and losses.

Step 1: Linking the accounts

You start by choosing a provider and subscribing. Depending on the system, you may:

  • Click "copy" on a broker's social platform and choose an amount to allocate.
  • Subscribe to a signal on MetaTrader and enable it in your terminal.
  • Connect your broker account to an independent copy service by entering account details.

Before copying begins, you choose your settings. Read them carefully; they decide how much risk each copied trade carries.

Step 2: Choosing a sizing mode

Sizing decides how big each copied trade is. Common modes are:

Proportional (equity ratio)

Each trade is scaled by the ratio of your allocation or equity to the provider's equity.

Example: The provider's account is USD 50,000. You allocate USD 5,000, a ratio of 1:10. The provider buys 2 lots; you receive 0.2 lots. If the provider's equity grows to USD 60,000 and yours stays at USD 5,000, the ratio changes, and future trades scale accordingly.

Proportional sizing keeps your risk roughly in line with the provider's percentage risk. It is the default on most platforms.

Fixed lot

Every copied trade opens at a fixed size you choose, regardless of the provider's size.

Example: You set 0.1 lots. The provider opens 1 lot and later 5 lots; you open 0.1 lots both times. Your risk is no longer proportional: a large trade by the provider is the same size as a small one for you.

Multiplier

Each trade is the provider's size multiplied by a factor you set, such as 0.5 or 2.

Example: With a 0.5 multiplier, a 1-lot trade by the provider becomes 0.5 lots for you. This ignores account size, so a multiplier that suits a large account can be far too risky on a small one.

Fixed risk or money per trade

Some systems scale trades so that each one risks a set amount based on the provider's stop-loss. This requires the provider to use stops consistently.

Proportional sizing is usually the safest starting point, because it follows the provider's own risk management. Other modes can be useful but need careful thought about what happens when the provider changes trade size.

Step 3: How orders are copied

When the provider acts, the copy engine detects the change and sends a matching instruction to your account.

  1. Open: the provider opens a position; your account opens a scaled position on the same instrument and direction.
  2. Modify: the provider moves the stop-loss or take-profit; your position's levels are updated.
  3. Partial close: the provider closes part of a position; your account closes the same proportion.
  4. Close: the provider closes; your position closes.

Your broker executes each order at the price available when the instruction arrives. In normal conditions, that is very close to the provider's price. In fast markets, it can differ.

Pending orders

Some systems copy pending orders, such as limit and stop orders, so they sit in your account and trigger at the same level. Others copy only executed trades, so your entry happens after the provider's order fills.

Step 4: Why your fills differ

Small differences between the provider's results and yours are normal.

  • Timing: copied orders arrive milliseconds to seconds after the provider's. In fast markets, the price may have moved.
  • Slippage: market orders fill at the best available price, which may differ from the quote.
  • Different brokers: if you and the provider use different brokers, spreads, prices and swaps differ.
  • Rounding: scaled sizes are rounded to the broker's lot step. Very small allocations can round to zero or to the minimum size.
  • Costs: fees to the provider and any extra spread on copy accounts reduce your net results.

Example: The provider opens 0.15 lots, and your ratio is 1:20. Your scaled size is 0.0075 lots, below the broker's minimum of 0.01. Depending on the system, the trade is skipped or opened at 0.01 lots, which is a third larger than proportional. Over many trades, rounding can make your results differ meaningfully from the provider's.

This is why most platforms set a minimum allocation, and why larger allocations copy more accurately.

Step 5: Joining while trades are open

If the provider has open positions when you start copying, systems handle it in different ways:

  • New trades only: you copy only positions opened after you start.
  • Copy open trades: your account opens the existing positions at the current market price.

Copying open trades at current prices means your entry differs from the provider's, so the same exit can produce a different result. Some traders prefer to start copying when the provider has no open positions.

Step 6: Risk settings you control

Most platforms give followers several controls:

  • Copy stop-loss: stops copying and closes all copied positions if your allocation falls by a set amount or percentage.
  • Maximum trade size: caps the size of any single copied trade.
  • Maximum open positions: limits how many copied trades can be open.
  • Instrument filters: excludes certain markets.
  • Pause: stops new trades from being copied while keeping existing ones.
  • Manual close: closes a single copied trade yourself.

Example: You allocate USD 3,000 to a provider whose maximum historical drawdown is 15%. You set a copy stop-loss at 25%, so copying stops if the allocation falls to USD 2,250. You also cap any single trade at 0.3 lots, so an unusually large trade by the provider cannot oversize your account.

Closing a copied trade manually usually breaks the link for that trade, so later changes by the provider will not apply to it.

Step 7: Margin and leverage

Copied trades use margin in your account like any other trade. If your free margin is too low, new copied trades may be rejected, and existing positions could reach a margin call or stop-out if losses grow.

Leverage limits on your account also apply. A provider with higher leverage available may open trades that your account cannot fully copy under stricter limits. Read leverage explained.

Keep a margin buffer in the follower account, especially if you copy several providers.

Step 8: Fees and how they are charged

Fees are charged in different ways depending on the platform:

  • Performance fees, usually on new profits above a high-water mark, deducted periodically.
  • Subscription fees, charged monthly.
  • Volume fees, charged per lot copied.
  • Markups, built into the spread on copy accounts.

Check when fees are calculated and deducted, because a fee taken during an open drawdown changes your equity.

Step 9: Monitoring and stopping

Review copied accounts regularly:

  • Compare your results with the provider's and look for unusual differences.
  • Watch for changes in the provider's behavior: larger trades, new instruments, more frequent trading or removed stops.
  • Check that rounding is not skipping trades.

When you stop copying, the platform asks whether to close copied positions immediately or leave them open for you to manage. Leaving them open means you manage them manually from then on.

A full example

A trader with USD 5,000 decides to allocate USD 2,000 to a provider whose account is USD 40,000 (ratio 1:20), with proportional sizing, a copy stop-loss at 20% and a maximum trade size of 0.5 lots.

  • The provider buys 1 lot of EUR/USD with a 30-pip stop. The follower opens 0.05 lots with the same stop.
  • The provider moves the stop to break-even. The follower's stop moves.
  • The provider closes half. The follower closes 0.02 or 0.03 lots, depending on rounding.
  • The provider closes the rest at 60 pips profit. The follower's remaining position closes, slightly differently due to timing.

Over the month, the follower's percentage return is close to the provider's, minus a performance fee and small execution differences.

Key takeaways

  • Copy trading sends scaled copies of a provider's orders to your account automatically.
  • Proportional sizing follows the provider's risk; fixed and multiplier modes need care.
  • Timing, slippage, different brokers, rounding and fees make results differ.
  • Small allocations copy less accurately because of minimum trade sizes.
  • Use copy stop-losses, size caps and margin buffers, and review regularly.

Compare brokers that offer copy trading on the copy trading list or with the comparison tool.

Brokers with copy trading

Put this into practice on a demo account first, with no money at risk.

Frequently asked questions

How are trades copied into my account?

When the provider opens, modifies or closes a trade, the copy platform sends a matching order to your account, scaled by your sizing settings. The order is executed by your broker at the price available when it arrives.

What is proportional copying?

Proportional copying scales each trade by the ratio of your allocation, or equity, to the provider's equity. If you allocate a tenth of the provider's balance, each copied trade is about a tenth of the provider's size.

Why are some trades not copied?

Usually because the scaled size is below the broker's minimum trade size, your free margin is too low, the instrument is not available on your account, or copying was paused or stopped.

Do stop-losses copy too?

Usually yes. Most platforms copy the provider's stop-loss and take-profit levels, and modifications to them. Some platforms let you add your own copy-level stop-loss on top.

What happens if I start copying when the provider has open trades?

Depending on the platform, you may copy only new trades, or open the existing trades at the current market price, which can differ from the provider's entry.

Can I close a copied trade myself?

On most platforms, yes. Closing manually breaks the link for that trade, so later changes by the provider to that position will not be copied.