Skip to content
Menu

Average Directional Index (ADX)

By Chad Smith, Director of Research & Analysis · Updated

On this page
  1. What it measures
  2. The formula
  3. Default settings
  4. How to read it
  5. ADX vs moving averages and Aroon
  6. Common strategies
  7. Weaknesses
  8. Indicators it pairs with
25+DI−DIADX 14
Illustration, not real price data

The Average Directional Index (ADX) is a trend-strength indicator that runs from 0 to 100. J. Welles Wilder introduced it in 1978 as part of his Directional Movement System. ADX tells you whether a market is trending strongly or drifting sideways. It does not tell you which way the trend is going; that is the job of the +DI and −DI lines it comes from.

What it measures

ADX measures the strength of directional movement. It starts by asking, for each bar, whether the market pushed further up than it pushed down, or the reverse. These pushes are averaged and compared with overall volatility to give two direction lines, +DI and −DI. ADX then measures how far apart those two lines are, and smooths the result.

When one side dominates consistently, the DI lines separate and ADX rises. When neither side dominates, they stay close together and ADX falls. That is why ADX can be high in a strong downtrend: one side is in clear control.

ADX is often shown with the +DI and −DI lines. That full set is called the DMI, which has its own page.

The formula

Directional movement for each bar:
  UpMove   = High(today) − High(yesterday)
  DownMove = Low(yesterday) − Low(today)
  +DM = UpMove   if UpMove > DownMove and UpMove > 0,   otherwise 0
  −DM = DownMove if DownMove > UpMove and DownMove > 0, otherwise 0

True range (TR) = the largest of
  High − Low, |High − Previous Close|, |Low − Previous Close|

Smooth +DM, −DM and TR over N bars using Wilder's smoothing.

+DI = 100 × Smoothed +DM / Smoothed TR
−DI = 100 × Smoothed −DM / Smoothed TR

DX  = 100 × |(+DI) − (−DI)| / ((+DI) + (−DI))
ADX = Wilder-smoothed average of DX over N bars

where N = 14 by default

Worked example (illustrative numbers). Suppose after smoothing, +DI is 30 and −DI is 10. DX = 100 × |30 − 10| / (30 + 10) = 100 × 20 / 40 = 50. If the previous ADX was 40, the new ADX with N = 14 is (40 × 13 + 50) / 14 = 570 / 14 = 40.7. Now suppose instead that +DI is 22 and −DI is 18. DX = 100 × 4 / 40 = 10. A low DX like this pulls ADX down, showing a weak trend because neither side dominates.

Default settings

SettingConventional value
DI period14
ADX smoothing14
Trend threshold20 to 25

Some traders use a shorter period, such as 7 or 10, for faster readings on intraday charts. ADX is built into MetaTrader, TradingView and other standard platforms. On some platforms it appears under the name "ADX and DI" or "Directional Movement".

How to read it

Level. A common rule of thumb treats ADX below 20 as a weak or absent trend and above 25 as a trending market. Readings much higher show a very strong trend. These levels are guides, not hard limits.

Slope. A rising ADX means the trend is strengthening, whatever its direction. A falling ADX means it is losing strength. ADX turning down from a high level often marks the point where a strong trend starts to pause or consolidate, not necessarily reverse.

Direction from the DI lines. If +DI is above −DI, upward movement dominates. If −DI is above +DI, downward movement dominates. A cross of the DI lines is a possible change in direction.

Lag. ADX is double smoothed, so it reacts slowly. By the time it rises above 25, the trend has usually been underway for some time.

ADX vs moving averages and Aroon

Moving averages show the direction of the trend but say little about its strength. ADX shows strength but not direction. That is why they are often used together: the average decides direction, and ADX decides whether to trust it.

Aroon also tries to show whether a market is trending, but uses the time since the last high and low rather than the size of moves. Aroon reacts to new highs and lows more quickly. ADX is smoother and less likely to flip on one bar.

The choppiness index is another tool for telling trends from ranges, but it is not part of Wilder's system.

Common strategies

Trend filter

Only use trend-following signals, such as moving average crossovers or breakouts, when ADX is above a threshold like 20 or 25. When it is below, switch to range methods or stand aside.

Range filter for oscillators

When ADX is low and falling, oscillators such as RSI or the stochastic oscillator tend to work better, because price is more likely to swing between support and resistance.

Rising ADX from low levels

ADX climbing from below 20 can show that a new trend is forming after a quiet phase. Traders then look at the DI lines and price structure to decide direction.

DI crossovers with ADX confirmation

Wilder's own approach was to trade +DI and −DI crosses, using the extreme point of the crossover bar as a stop. Many traders add a rule that ADX must be rising for the cross to count.

Weaknesses

ADX lags. Double smoothing makes it slow, so it confirms trends late and turns down after they have already begun to weaken.

It gives no direction on its own. Reading a high ADX as bullish is a common mistake.

Thresholds vary. A level of 25 may mark a trend on one market and not on another, and the choice of period changes the readings.

In choppy markets with sharp swings, ADX can rise briefly without a sustained trend, giving false confirmation.

Indicators it pairs with

  • DMI, for the +DI and −DI direction lines.
  • Moving averages, to set trend direction while ADX judges strength.
  • Parabolic SAR, another Wilder tool that works best when ADX shows a trend.
  • ATR, which shares the same true range input and helps with stops.
  • RSI, which suits the low-ADX range conditions where trend tools struggle.

The technical analysis course explains how to tell trending markets from ranging ones and why that choice matters.

Brokers with strong charting to practice on

Put this into practice on a demo account first, with no money at risk.

Frequently asked questions

What does ADX measure?

ADX measures how strong a trend is, whether up or down. A rising ADX means the trend is gaining strength, and a falling ADX means it is weakening or the market is moving sideways.

Does a high ADX mean price is going up?

No. ADX rises in both strong uptrends and strong downtrends. To see direction, traders look at the +DI and −DI lines that ADX is built from.

What ADX level shows a trend?

Many traders treat readings above 25 as a trending market and below 20 as a weak or ranging one. These are conventions, not fixed rules.

What is the difference between ADX and DMI?

DMI is the full system of +DI, −DI and ADX. ADX is the one line that measures strength, while the DI lines show which side is in control.

Why does ADX fall even when price keeps rising?

ADX falls when the trend slows or becomes choppier, even if price still edges higher. It measures the strength of directional movement, not the price level.