Money Flow Index (MFI)
By Chad Smith, Director of Research & Analysis · Updated
On this page
The money flow index (MFI) is a momentum oscillator that combines price and volume on a scale from 0 to 100. It is often described as a volume-weighted RSI, because it follows the same structure but replaces price changes with money flow. Gene Quong and Avrum Soudack are credited with introducing it. MFI is used to spot stretched conditions and divergence where price and volume disagree.
What it measures
MFI measures the balance between money flowing into a market on up bars and money flowing out on down bars. Each bar's money flow is its typical price multiplied by its volume. If the typical price rose from the previous bar, that money flow counts as positive. If it fell, it counts as negative.
Over a lookback period, MFI compares total positive flow with total negative flow. When positive flow dominates, MFI rises toward 100. When negative flow dominates, it falls toward 0.
Because volume is part of the calculation, a price move on heavy volume affects MFI more than the same move on light volume. That is what separates it from RSI, which treats every price change the same regardless of volume.
The formula
Typical Price (TP) = (High + Low + Close) / 3
Raw Money Flow (RMF) = TP × Volume
For each bar:
If TP(today) > TP(yesterday): positive money flow = RMF
If TP(today) < TP(yesterday): negative money flow = RMF
If equal: neither
Over N bars:
Money Flow Ratio (MFR) = sum of positive flow / sum of negative flow
MFI = 100 − 100 / (1 + MFR)
where N = the lookback period (14 by default)
Worked example (illustrative numbers). Over 14 bars, the sum of positive money flow is 3,000,000 and the sum of negative money flow is 1,000,000. MFR = 3,000,000 / 1,000,000 = 3. MFI = 100 − 100 / (1 + 3) = 100 − 25 = 75. Money has flowed in more than out, but MFI is still below the overbought level of 80. If a single down bar arrived with very heavy volume, adding 1,500,000 to negative flow, MFR would fall and MFI would drop sharply.
Default settings
| Setting | Conventional value |
|---|---|
| Period | 14 |
| Overbought | 80 |
| Oversold | 20 |
| Source | Typical price and volume |
The money flow index is built into MetaTrader, TradingView and most charting platforms. On spot forex charts it uses tick volume.
How to read it
Overbought and oversold. MFI above 80 is overbought and below 20 is oversold. Because volume can amplify readings, MFI reaches these zones somewhat differently from RSI. As with all oscillators, extremes describe conditions, not certain reversals.
Divergence. If price makes a higher high but MFI makes a lower high, buying volume is weakening behind the advance. Quong and Soudack considered divergence one of MFI's most useful signals, particularly when MFI is above 80 or below 20.
Failure swings. Like RSI, MFI can show failure swings: a move into overbought, a pullback, a failed attempt to return to overbought, then a break below the pullback low.
The 50 line. MFI above 50 suggests more money flowing in than out over the period; below 50 suggests the reverse.
MFI vs RSI, OBV and CMF
RSI uses closing price changes only. MFI uses typical price direction and weights each bar by volume. A strong rally on thin volume will lift RSI more than MFI. A modest rally on heavy volume will lift MFI more than RSI. When the two disagree, volume is telling a different story from price.
OBV is a cumulative volume line, not a bounded oscillator, and it uses close-to-close direction. Chaikin money flow weights volume by where the close sits within the bar and oscillates around zero. MFI is the only one of the three with an RSI-style 0 to 100 scale and fixed overbought and oversold levels.
Common strategies
Reversal at extremes in ranges
In a range, sell when MFI turns down from above 80 near resistance and buy when it turns up from below 20 near support. Waiting for MFI to cross back inside the zone reduces early entries.
Divergence with price structure
Combine MFI divergence with a reversal pattern such as a double top or a bearish engulfing candle. The divergence warns; the pattern gives a trigger.
Trend pullbacks
In an uptrend, an MFI dip toward 20 to 40 can mark a pullback with selling volume drying up. A turn back above 40 can time a re-entry in the trend direction.
Volume confirmation of breakouts
When price breaks out, check whether MFI is rising. A breakout with MFI falling suggests the move lacks volume backing.
Weaknesses
MFI can stay overbought or oversold in strong trends, just like RSI. Fading extremes against the trend leads to repeated losses.
It depends on volume quality. Tick volume in spot forex is only a rough proxy for real volume.
Single volume spikes distort it. One bar with unusual volume, such as on a news release or an index event, can swing MFI sharply for the length of the lookback.
Divergence can last a long time. MFI can disagree with price through several swings before any reversal happens, or without one at all.
Indicators it pairs with
- RSI, to compare price-only momentum with volume-weighted momentum.
- OBV or chaikin money flow, for other views of volume flow.
- Moving averages or ADX, to judge trend before reading MFI extremes.
- Bollinger Bands, to see whether MFI extremes coincide with band touches.
- VWAP, for intraday volume context.
For more on combining volume and momentum, see the technical analysis course.
Brokers with strong charting to practice on
Put this into practice on a demo account first, with no money at risk.
- Featured broker
Pepperstone4.7 / 5Visit
IC Markets4.9 / 5Visit
GO Markets4.8 / 5Visit
Frequently asked questions
What does the money flow index measure?
MFI measures buying and selling pressure by combining typical price and volume. It shows whether money has been flowing into a market on up bars or out of it on down bars.
Why is MFI called a volume-weighted RSI?
Its formula follows the same structure as RSI, but instead of price changes it uses money flow, which is typical price multiplied by volume.
What are the MFI overbought and oversold levels?
The conventional levels are 80 for overbought and 20 for oversold. Some traders use 90 and 10 to focus on more extreme readings.
How is MFI different from RSI?
RSI uses only closing prices, while MFI uses typical price and volume. MFI can diverge from RSI when large moves happen on unusually high or low volume.
Who created the money flow index?
It is credited to Gene Quong and Avrum Soudack, who described it in the late 1980s.