Pips and Lots: Measuring Price Moves and Trade Size
By Chad Smith, Director of Research & Analysis · Updated
On this page
Now that you can read a currency pair, you need units to measure two things: how far the price moved, and how big your trade is. Forex uses pips for the first and lots for the second. Together they tell you exactly how much money a move is worth.
What a pip is
A pip is the standard unit of price movement in a currency pair. For most pairs it is the fourth decimal place, or 0.0001.
Example: EUR/USD moves from 1.1000 to 1.1025. The change is 0.0025, which is 25 pips.
Pairs that include the Japanese yen are the main exception. Because one yen is worth much less than one dollar or euro, yen pairs are quoted with two decimal places, and a pip is the second decimal place, or 0.01.
Example: USD/JPY moves from 149.50 to 150.10. The change is 0.60, which is 60 pips.
Pips and pipettes
Most platforms show one extra decimal place: five decimals for EUR/USD (1.10253) and three for USD/JPY (150.104). That extra digit is a pipette, or fractional pip. One pipette is one tenth of a pip.
This causes a common mistake. If EUR/USD moves from 1.10250 to 1.10260, the last two digits changed by 10, but the price moved only one pip. Always count pips at the fourth decimal (or second for yen pairs), and treat the final digit as tenths.
Some platforms use the word "point" for the smallest price step, which is often a pipette. Check how your platform labels it before setting a stop distance in points.
What a lot is
A lot is a standard trade size, measured in units of the base currency. Three sizes are common:
| Lot | Units of base currency |
|---|---|
| Standard lot | 100,000 |
| Mini lot | 10,000 |
| Micro lot | 1,000 |
So 1 standard lot of EUR/USD is 100,000 euros, 1 mini lot is 10,000 euros and 1 micro lot is 1,000 euros. Platforms usually write sizes in standard lots with decimals: 0.10 is a mini lot and 0.01 is a micro lot.
You do not need 100,000 euros to open a standard lot. With borrowed money from your broker you need only a fraction of it as a deposit. That is covered in the lesson on leverage and margin.
Turning pips into money
The money value of one pip depends on the trade size and on the quote currency. The basic formula is:
Pip value (in quote currency) = pip size × number of units
For a pair quoted in US dollars, such as EUR/USD or GBP/USD:
- 1 standard lot: 0.0001 × 100,000 = 10 US dollars per pip
- 1 mini lot: 0.0001 × 10,000 = 1 US dollar per pip
- 1 micro lot: 0.0001 × 1,000 = 0.10 US dollars per pip
Worked example (illustrative numbers): you buy 0.20 lots of EUR/USD at 1.1000 and close at 1.1040. That is 40 pips. Each pip on 0.20 lots is worth 2 US dollars, so the profit is 40 × 2 = 80 US dollars, before costs.
When the quote currency is not your account currency
If the quote currency differs from your account currency, the pip value first comes out in the quote currency and must be converted.
Worked example (illustrative numbers): you trade 1 standard lot of USD/JPY with a US dollar account. The pip value in yen is 0.01 × 100,000 = 1,000 yen. With USD/JPY at 150.00, 1,000 yen is worth about 1,000 ÷ 150 = 6.67 US dollars. So each pip is worth roughly 6.67 US dollars, and the figure changes a little as the exchange rate moves.
For EUR/GBP with a US dollar account, the pip value comes out in pounds and is converted at the GBP/USD rate. You do not need to do these sums by hand every time. A pip value calculator does the conversion for any pair and account currency.
Why this matters
Pips and lots connect your idea to your risk. A stop-loss 30 pips away sounds small, but on 2 standard lots of EUR/USD it is 30 × 20 = 600 US dollars. On 2 micro lots it is 6 US dollars. The distance is the same; the money is very different.
This is why experienced traders decide the money they are willing to lose first, then pick the lot size that fits their stop distance. You will learn that method in the risk course lesson on position sizing.
Check your understanding
Try this worked example (illustrative numbers) before moving on. You sell 0.05 lots of GBP/USD at 1.2700 and close at 1.2655. The price fell 0.0045, which is 45 pips. A sell trade profits when price falls, so this is a gain. Each pip on 0.05 lots is worth 0.0001 × 5,000 = 0.50 US dollars, so the gain is 45 × 0.50 = 22.50 US dollars before costs.
Pips on other markets
Brokers also offer indices, metals, oil and crypto. These usually move in points or whole currency units rather than pips, and each broker defines the contract size and minimum price step in its contract specifications. Always read those specifications before trading a new market, because a "lot" of gold or of an index is not the same as a lot of a currency.
Key takeaways
- A pip is 0.0001 on most pairs and 0.01 on yen pairs; a pipette is one tenth of a pip.
- A standard lot is 100,000 units, a mini lot 10,000 and a micro lot 1,000.
- Pip value equals pip size times units, and on USD-quoted pairs one standard lot is worth 10 US dollars per pip.
- When the quote currency differs from your account currency, convert the pip value at the current rate.
- The same pip distance can mean very different money, so size trades from the money at risk.
Check your understanding
1. EUR/USD moves from 1.0850 to 1.0880. How many pips is that?
- A. 3 pips
- B. 30 pips
- C. 300 pips
- D. 0.3 pips
Show answer
B. 30 pips
2. How many units of the base currency are in a mini lot?
- A. 1,000
- B. 10,000
- C. 100,000
- D. 1,000,000
Show answer
B. 10,000
3. On EUR/USD with a US dollar account, what is one pip worth on one standard lot?
- A. 0.10 US dollars
- B. 1 US dollar
- C. 10 US dollars
- D. 100 US dollars
Show answer
C. 10 US dollars
Where to practice this
Put this into practice on a demo account first, with no money at risk.
- Featured broker
Pepperstone4.7 / 5Visit
IC Markets4.9 / 5Visit
GO Markets4.8 / 5Visit