Skip to content
Menu

Position Sizing: Turning Risk Into Lot Size

By Chad Smith, Director of Research & Analysis · Updated

On this page
  1. The core formula
  2. Example 1: a USD-quoted pair
  3. Example 2: a yen pair
  4. Example 3: a cross pair
  5. Example 4: gold and other markets
  6. Rounding and minimum sizes
  7. Including costs
  8. Wide stops, small sizes
  9. A quick routine
  10. Key takeaways

In this lesson you will learn

  • Apply the position sizing formula to any trade
  • Size trades on USD-quoted, yen and cross pairs
  • Size trades on non-forex markets using contract specifications
  • Round sizes correctly and include costs

In the previous lesson you chose how much money to risk on a trade. This lesson shows how to turn that money into a position size, so that if your stop-loss is hit, you lose exactly what you planned. The method works for every pair and market. Our position size calculator does the arithmetic, but you should understand it first.

The core formula

Position sizing needs three inputs: money at risk, stop distance and pip value.

Money at risk = account × risk %
Pip value needed = money at risk ÷ stop distance (pips)
Position size (lots) = pip value needed ÷ pip value of 1 standard lot

The stop distance comes from your chart, as covered in the stop-loss placement lesson. The pip value of one standard lot depends on the pair and your account currency, as covered in the pips and lots lesson.

The key idea: the stop is set by the market, the risk is set by your rules, and the size is what is left to calculate. Never pick the size first.

ExampleMoney at risk10,000 × 1%= 100 USDRisk per lot50 pips × 10 USD= 500 USD÷Position size100 ÷ 500 = 0.20 lotsLots = (account × risk %) ÷ (stop in pips × pip value per lot)
Size the position so that hitting the stop loses only the money you chose to risk: money at risk divided by risk per lot.

Example 1: a USD-quoted pair

Worked example (illustrative numbers): account 5,000 US dollars, risk 1%, buying EUR/USD with a 25-pip stop.

  • Money at risk: 5,000 × 1% = 50 US dollars.
  • Pip value needed: 50 ÷ 25 = 2 US dollars per pip.
  • One standard lot of EUR/USD is worth 10 US dollars per pip.
  • Size: 2 ÷ 10 = 0.20 lots.

If the stop is hit, the loss is 25 pips × 2 US dollars = 50 US dollars, before costs.

Example 2: a yen pair

On yen pairs, the pip is 0.01 and the pip value comes out in yen, so it must be converted.

Worked example (illustrative numbers): same account and risk, selling USD/JPY at 150.00 with a 40-pip stop.

  • Money at risk: 50 US dollars.
  • Pip value needed: 50 ÷ 40 = 1.25 US dollars per pip.
  • One standard lot: 0.01 × 100,000 = 1,000 yen per pip, which at 150.00 is about 6.67 US dollars.
  • Size: 1.25 ÷ 6.67 = about 0.187 lots, rounded down to 0.18 lots.

Example 3: a cross pair

On a cross such as EUR/GBP, the pip value is in pounds and must be converted to your account currency.

Worked example (illustrative numbers): same account and risk, buying EUR/GBP with a 30-pip stop. GBP/USD is 1.2700.

  • Money at risk: 50 US dollars.
  • Pip value needed: 50 ÷ 30 = about 1.67 US dollars per pip.
  • One standard lot: 10 pounds per pip, which is 10 × 1.27 = 12.70 US dollars.
  • Size: 1.67 ÷ 12.70 = about 0.131 lots, rounded down to 0.13 lots.

Example 4: gold and other markets

Non-forex markets use contract sizes set by each broker. Always read the contract specification before trading.

Worked example (illustrative numbers, assuming a contract where 1 lot of gold is 100 ounces): a 1 US dollar move in the gold price is worth 100 US dollars per lot. You risk 50 US dollars with a stop 15 US dollars from the entry.

  • Loss per lot if stopped out: 15 × 100 = 1,500 US dollars.
  • Size: 50 ÷ 1,500 = about 0.033 lots, rounded down to 0.03 lots.

The same method works for indices, oil and share CFDs: find the money value of one unit of price movement per lot, multiply by the stop distance, and divide your money at risk by the result.

Rounding and minimum sizes

Platforms usually allow sizes in steps of 0.01 lots, one micro lot. Always round down, so your actual risk stays at or below your plan.

If the formula gives a size smaller than the minimum, the trade cannot be taken at your planned risk. Either skip it, find a setup with a tighter logical stop, or accept that your account is too small for that setup. The how much money to start lesson covers this situation.

Including costs

The formula covers the distance to the stop, but the trade also pays the spread and any commission. On short-term trades with tight stops, these can add noticeably to the real loss.

Worked example (illustrative numbers): a 10-pip stop on 0.50 lots of EUR/USD risks 50 US dollars. A 1-pip total cost adds 5 US dollars, raising the real loss to 55 US dollars, which is 10% more than planned. Some traders add the cost to the stop distance before sizing, which gives 50 ÷ 11 = about 4.55 US dollars per pip, or 0.45 lots.

Wide stops, small sizes

Because the money risk is fixed, the stop distance drives the size:

Stop distanceSize for 50 US dollars risk on EUR/USD
10 pips0.50 lots
25 pips0.20 lots
50 pips0.10 lots
100 pips0.05 lots

This is liberating. You can place the stop where the market says it belongs, wide or tight, and still lose the same amount if you are wrong. Traders who use a fixed lot size instead take random amounts of risk on every trade.

A quick routine

Before every trade:

  1. Mark the entry and the stop on the chart.
  2. Measure the stop distance in pips or points.
  3. Calculate money at risk from your account and risk percentage.
  4. Calculate the size, round down and check it against the platform minimum.
  5. Check that total open risk stays within your cap, as described in risk per trade.

Key takeaways

  • Position size equals money at risk divided by the money value of the stop distance.
  • Choose the stop from the chart and the risk from your rules; the size follows.
  • Convert pip values for yen pairs, crosses and non-USD accounts.
  • Read contract specifications for gold, indices and other markets.
  • Round down, include costs on tight stops and skip trades that cannot be sized within your rules.

Check your understanding

  1. 1. You risk 30 US dollars with a 15-pip stop on EUR/USD. What position size fits?

    • A. 0.02 lots
    • B. 0.20 lots
    • C. 2.00 lots
    • D. 0.15 lots
    Show answer

    B. 0.20 lots

  2. 2. The formula gives 0.137 lots. What should you trade?

    • A. 0.14 lots
    • B. 0.13 lots
    • C. 0.20 lots
    • D. 1.37 lots
    Show answer

    B. 0.13 lots

  3. 3. What changes the position size most for a fixed money risk?

    • A. The stop distance
    • B. The color of the candle
    • C. The broker's logo
    • D. The time of day
    Show answer

    A. The stop distance

Where to practice this

Put this into practice on a demo account first, with no money at risk.