Order Types for Stocks
By Chad Smith, Director of Research & Analysis · Updated
On this page
In this lesson you will learn
- Explain market, limit, stop and stop-limit orders for shares
- Choose a time-in-force setting such as day or good till canceled
- Recognize gap risk and its effect on stop orders
- Match the order type to the situation
The exchanges lesson explained when and where shares trade. This lesson explains how to tell your broker what to do. You will learn the main order types for shares, how long orders last, how price gaps affect stop orders, and which order fits each situation.
Market orders
A market order buys or sells immediately at the best available price.
- Advantage: it almost always fills during regular hours.
- Disadvantage: you do not control the price. In fast markets or thinly traded shares, you may get slippage, a fill worse than the price you saw.
Market orders suit large, liquid shares during regular hours, when spreads are narrow and you need the trade done now.
Limit orders
A limit order sets the worst price you will accept.
- A buy limit fills at your limit price or lower.
- A sell limit fills at your limit price or higher.
Worked example (illustrative numbers): a share trades at 25.30. You want to buy, but only at 25.00 or less. You place a buy limit at 25.00. If the price falls to 25.00, your order may fill. If it never falls that far, you do not buy.
Advantage: price control. Disadvantage: the order may not fill, or may fill only partly, known as a partial fill, if there are not enough shares at your price.
Limit orders are especially useful for less liquid shares, at the open, and outside regular hours.
Stop orders (stop-loss)
A stop order becomes a market order when the price reaches a set level, called the stop price. For shares, the most common use is a sell stop below the current price to limit a loss, often called a stop-loss.
Worked example (illustrative numbers): you buy at 50.00 and place a sell stop at 46.00. If the price falls to 46.00, a market sell order is sent. You usually sell near 46.00, but in a fast fall, the fill could be lower.
A buy stop above the current price is used to enter when a share breaks above a level, or to limit losses on a short position.
Stop-limit orders
A stop-limit order combines both ideas. When the stop price is reached, a limit order is placed instead of a market order.
Worked example (illustrative numbers): you own shares at 50.00 and place a stop-limit with a stop at 46.00 and a limit at 45.50. If the price falls to 46.00, a sell limit at 45.50 is placed. You will sell at 45.50 or better, but if the price drops straight through to 44.00, your order may not fill at all, and you keep holding a falling share.
Stop-limits protect against selling at a very poor price but risk not selling. Many investors prefer simple stop orders for loss control, accepting some slippage risk.
Trailing stops
A trailing stop moves the stop price up as the share price rises, keeping a set distance in money or percentage. It never moves down.
Worked example (illustrative numbers): you buy at 100 and set a 10% trailing stop, starting at 90. The share rises to 120, so the stop moves to 108. If the share then falls to 108, the stop triggers. If the share keeps rising, the stop keeps following.
Trailing stops let profits run while protecting part of a gain. A distance that is too tight may sell on normal price swings.
Gap risk
Stop orders do not guarantee a price. Shares can open at a very different price from the previous close, called a gap, often after company results or major news released outside trading hours.
Worked example (illustrative numbers): a share closes at 40. You have a sell stop at 38. Overnight, the company reports poor results, and the share opens at 34. Your stop triggers at the open and fills near 34, not 38. The loss is larger than planned.
Gap risk is one reason to keep position sizes sensible, so that a gap does not cause unacceptable damage. Check results dates before holding a share overnight if you want to avoid this risk.
Time in force
Time in force sets how long an order stays active:
- Day order: expires at the end of the trading day if not filled.
- Good till canceled (GTC): stays active until filled or canceled, often with a maximum period set by the broker.
- Immediate or cancel (IOC): fills whatever it can at once and cancels the rest.
- Fill or kill (FOK): fills completely at once or not at all.
Check your broker's defaults. A GTC order you forgot about can fill weeks later when you no longer want it.
Extended-hours orders
Outside regular hours, many brokers accept only limit orders, and stop orders may not trigger until the regular session. If you trade pre-market or after-hours, check how your broker handles each order type.
Choosing the right order
- Buying a large, liquid share during regular hours: a market order is usually fine; a limit order gives price control.
- Buying a small or thinly traded share: use a limit order.
- Buying at the open or outside regular hours: use a limit order.
- Protecting a position: use a stop or trailing stop, and size the position for gap risk.
- Entering on a breakout: use a buy stop, or a stop-limit if you want price control.
You can test how a stop distance affects the size of your position with the position size calculator.
Key takeaways
- Market orders fill at once but without price control; limit orders control price but may not fill.
- Stop orders become market orders at the stop price and can fill worse in fast markets.
- Stop-limit orders control the fill price but risk not filling at all.
- Gaps can make stop orders fill far beyond the stop price.
- Choose time in force carefully, and use limit orders in thin markets and outside regular hours.
Check your understanding
1. You want to buy a share only if you can pay 25.00 or less. Which order fits?
- A. Market order
- B. Buy limit order at 25.00
- C. Buy stop order at 25.00
- D. Sell stop order
Show answer
B. Buy limit order at 25.00
2. A share closes at 40 and you have a stop-loss sell order at 38. It opens the next day at 34. What usually happens?
- A. You sell at exactly 38
- B. The stop triggers and fills near 34
- C. Nothing happens
- D. The trade is canceled
Show answer
B. The stop triggers and fills near 34
3. What is the main risk of a stop-limit order?
- A. It always fills at a bad price
- B. It may not fill at all if the price moves past the limit
- C. It has no expiry
- D. It cannot be canceled
Show answer
B. It may not fill at all if the price moves past the limit
Stock brokers to put this into practice
Put this into practice on a demo account first, with no money at risk.
Trading 2124.8 / 5Visit
XTB4.5 / 5Visit
Interactive Brokers4.5 / 5Visit