Skip to content
Menu

Fibonacci Retracements and Extensions for Traders

By Chad Smith, Director of Research & Analysis · Updated

On this page
  1. Where the ratios come from
  2. The main levels
  3. How to draw retracements
  4. Calculating levels by hand
  5. Confluence makes levels useful
  6. Using Fibonacci in a trade
  7. Extensions for targets
  8. Limitations
  9. Key takeaways

In this lesson you will learn

  • Draw Fibonacci retracements on a clear swing
  • Calculate the main retracement and extension levels
  • Combine Fibonacci levels with support, resistance and trend
  • Understand why Fibonacci levels are zones, not exact turning points

In the trends lesson you learned to buy pullbacks in uptrends and sell rallies in downtrends. The hard part is judging how far a pullback might go. Fibonacci retracements are a popular way to map possible stopping points, and extensions are used to estimate targets. This lesson shows how to draw them and how to use them sensibly.

Where the ratios come from

The Fibonacci sequence is a series of numbers in which each number is the sum of the two before it: 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89 and so on. Ratios between numbers in the sequence settle at fixed values. For example, a number divided by the next one approaches 0.618, and a number divided by the one two places later approaches 0.382.

Traders use these ratios as percentage levels on a price move. There is no proven law that markets must respect them. Their main strength is that many traders watch them, so reactions often happen near them.

The main levels

The Fibonacci retracement tool marks these levels between a swing low and a swing high:

  • 23.6%: a shallow pullback, common in strong trends.
  • 38.2%: a moderate pullback.
  • 50%: not a Fibonacci ratio, but widely included because markets often retrace about half a move.
  • 61.8%: a deep pullback, often called the "golden ratio" level.
  • 78.6%: a very deep pullback; beyond it, the original move is in doubt.

Extension levels, used for targets, commonly include 127.2% and 161.8%.

How to draw retracements

  1. Identify a clear, completed swing in the direction of the trend.
  2. In an uptrend, anchor the tool at the swing low and drag it to the swing high.
  3. In a downtrend, anchor at the swing high and drag to the swing low.
  4. The tool then plots the levels between the two points.

Use obvious swings that other traders would also choose. If you have to search for the "right" swing, the levels will not be widely watched.

Calculating levels by hand

Retracement price (uptrend) = swing high − (swing high − swing low) × ratio
Extension price (uptrend) = swing low + (swing high − swing low) × extension ratio

Worked example (illustrative numbers): EUR/USD rises from a swing low at 1.1000 to a swing high at 1.1200, a 200-pip move.

  • 38.2% retracement: 1.1200 − (0.0200 × 0.382) = about 1.1124
  • 50% retracement: 1.1200 − 0.0100 = 1.1100
  • 61.8% retracement: 1.1200 − (0.0200 × 0.618) = about 1.1076
  • 161.8% extension: 1.1000 + (0.0200 × 1.618) = about 1.1324

If the trend is intact, a trader would watch the 1.1076–1.1124 area for signs that the pullback is ending.

Example0%1.120023.6%1.115338.2%1.112450%1.110061.8%1.107678.6%1.1043100%1.1000stop 1.1070buy 1.111040 pips of risk for 90 pips to the swing high.
Retracement levels mark a zone where a pullback might end; a price signal in the zone gives the entry.

Confluence makes levels useful

A Fibonacci level on its own is just a line. It becomes interesting when it lines up with something else, a situation called confluence.

  • An old resistance level that has become support.
  • A trendline from the trends lesson.
  • A moving average from the moving averages lesson.
  • A round number such as 1.1100.

Worked example (illustrative numbers): in the example above, the 50% level at 1.1100 is also a round number and a previous resistance level from earlier in the trend. That area has three reasons to attract buyers, so it deserves more attention than the 38.2% level, which lines up with nothing.

Using Fibonacci in a trade

Fibonacci levels help define a zone, not a trigger. A typical approach:

  1. Confirm the trend from market structure.
  2. Draw the retracement on the latest impulse swing.
  3. Mark the zone where Fibonacci levels meet other support.
  4. Wait for a price signal in the zone, such as a bullish candle pattern from the candlesticks lesson or an oscillator turning up from the oscillators lesson.
  5. Place the stop beyond the zone, often below the 61.8% or 78.6% level, where a deeper retracement would question the trend.
  6. Aim for the previous swing high, or for an extension level if the trend is strong.

Worked example (illustrative numbers): price pulls back to 1.1102 and forms a bullish engulfing candle. The trader buys at 1.1110 with a stop at 1.1070, just under the 61.8% level, and a first target at the swing high of 1.1200. That is 40 pips of risk for 90 pips of reward.

Extensions for targets

When price breaks above the previous high, there is no obvious resistance above. Extensions give a reference for where the move might pause. The 127.2% and 161.8% levels are the most common. Treat them like any target: a place to take some or all profit, not a level price must reach.

Limitations

  • Subjectivity. Different traders pick different swings, which gives different levels.
  • Too many lines. With five or more levels between any two points, price will almost always be "near" one. Without confluence, the levels mean little.
  • Hindsight. It is easy to find a level that worked on a past chart. That does not show it predicts.
  • No fixed reliability. No Fibonacci level is reliable on its own. Test rules that use them, as covered in the backtesting lesson.

Key takeaways

  • Fibonacci retracements mark 23.6%, 38.2%, 50%, 61.8% and 78.6% of a swing; extensions such as 161.8% project beyond it.
  • Anchor retracements from the swing low to the swing high in an uptrend, and the reverse in a downtrend.
  • Use clear, obvious swings so the levels match what other traders see.
  • Fibonacci levels become useful when they line up with other support, resistance or averages.
  • Treat levels as zones that need a price signal, and always place a stop beyond them.

Check your understanding

  1. 1. In an uptrend, where do you anchor a Fibonacci retracement?

    • A. From the swing high to the swing low
    • B. From the swing low to the swing high
    • C. From any two candles
    • D. From today's open to close
    Show answer

    B. From the swing low to the swing high

  2. 2. A swing runs from 1.2000 to 1.2100. Where is the 50% retracement?

    • A. 1.2025
    • B. 1.2050
    • C. 1.2075
    • D. 1.2100
    Show answer

    B. 1.2050

  3. 3. What makes a Fibonacci level more meaningful?

    • A. Confluence with other support or resistance
    • B. Drawing as many levels as possible
    • C. Using it on a 1-second chart
    • D. Ignoring the trend
    Show answer

    A. Confluence with other support or resistance

Brokers with strong charting to practice on

Put this into practice on a demo account first, with no money at risk.