Skip to content
Menu

Williams %R

By Chad Smith, Director of Research & Analysis · Updated

On this page
  1. What it measures
  2. The formula
  3. Default settings
  4. How to read it
  5. Williams %R vs the stochastic and RSI
  6. Common strategies
  7. Weaknesses
  8. Indicators it pairs with
-80-20%R 14
Illustration, not real price data

Williams %R, also called the Williams Percent Range, is a momentum oscillator that shows where the latest close sits relative to the high-low range of a recent period. Larry Williams developed it in the 1970s. It runs from 0 to −100: readings near 0 mean price closed near the top of its range, and readings near −100 mean it closed near the bottom.

What it measures

Williams %R measures the close's distance from the highest high of the lookback period, expressed as a percentage of the range. It is a measure of where buyers or sellers left price at the end of each bar.

The logic is similar to the stochastic oscillator. In strong uptrends, markets tend to close near their recent highs; in downtrends, near their lows. When closes start to land away from the extreme, momentum may be fading.

The negative scale is a quirk of how Williams wrote the formula. Instead of measuring from the low up, as the stochastic does, he measured from the high down. The information is the same, only flipped.

The formula

%R = (Highest High(N) − Close) / (Highest High(N) − Lowest Low(N)) × −100

where
  N            = the lookback period (14 by default)
  Highest High = the highest high of the last N bars
  Lowest Low   = the lowest low of the last N bars

Relationship to the stochastic:
  %R = Fast %K − 100

Worked example (illustrative numbers). Over the last 14 bars, the highest high is 80 and the lowest low is 60. Today's close is 76. %R = (80 − 76) / (80 − 60) × −100 = 4 / 20 × −100 = −20. The close is near the top of the range, right at the conventional overbought line. The raw stochastic %K for the same data would be 80, and 80 − 100 = −20, which confirms the link between the two.

Default settings

SettingConventional value
Period14
Overbought−20
Oversold−80

Williams himself often used a 10-period setting in his early work, and some traders use 28 for a slower reading. Williams %R is built into MetaTrader, TradingView and other standard charting platforms.

How to read it

Zones. Readings from 0 to −20 are overbought; readings from −80 to −100 are oversold. These say price closed near an edge of its recent range. They do not predict a reversal.

Leaving the zone. A common approach is to wait for %R to leave an extreme zone before acting. For example, a move from above −20 back below it suggests the close is pulling away from the highs.

Midpoint. The −50 line divides the range in half. Readings above −50 mean closes are in the upper half of the range; below means the lower half.

Momentum failure. Williams watched for the indicator to fail to reach its extreme on a new price high. If price makes a new high but %R stays below −20, the push is weaker than before. This is a form of divergence.

Williams %R vs the stochastic and RSI

Williams %R and the stochastic oscillator use the same inputs. The difference is presentation and smoothing. The common slow stochastic smooths %K and adds a %D signal line; Williams %R is usually shown raw. That makes %R faster and noisier, with sharp jumps between extremes.

RSI works differently. It compares the size of gains with losses over time and uses only closes. RSI is smoother, reaches extremes less often, and is generally preferred for divergence. Williams %R reacts more to where price sits within the range, so it can flag a change in close location before RSI moves much.

The ultimate oscillator, another Larry Williams tool, blends three timeframes to reduce the false signals a single-period oscillator like %R gives.

Common strategies

Trend-aligned extremes

Use a moving average to define the trend. In an uptrend, buy when %R drops into oversold and then rises back above −80. Ignore overbought readings, which are normal in a rising market.

Range fades

In a clear range, sell when %R leaves overbought near resistance and buy when it leaves oversold near support. Targets sit at the middle or opposite side of the range.

Momentum continuation

Some traders read persistent overbought readings as strength, not weakness. A market that keeps %R above −20 for many bars is closing at its highs, which is how strong trends behave.

Failure to reach extremes

On a new price high, check whether %R also reaches the overbought zone. A failure to do so warns that buying momentum is fading, which can precede a pullback.

Weaknesses

Williams %R is very sensitive. With no smoothing, it can swing from one extreme to the other in a few bars, creating many signals that do not lead anywhere.

It stays pinned in trends. Like other range-based oscillators, it can remain overbought or oversold for long periods while the trend continues, so fading extremes against the trend is costly.

The negative scale confuses some readers. A move "up" from −80 to −20 is a move toward overbought, which feels backward to people used to RSI.

It ignores volume and gives no indication of trend direction by itself.

Indicators it pairs with

For more on oscillators and how to filter them, see the technical analysis course.

Brokers with strong charting to practice on

Put this into practice on a demo account first, with no money at risk.

Frequently asked questions

What does Williams %R measure?

It measures how close the latest close is to the highest high of a recent period. Readings near zero mean the close is near the top of the range, and readings near minus 100 mean it is near the bottom.

Why is Williams %R negative?

Larry Williams defined it as the distance from the high, so it runs from 0 at the top of the range down to minus 100 at the bottom. Some platforms show it as a positive number instead.

What are the overbought and oversold levels for Williams %R?

The standard levels are minus 20 for overbought and minus 80 for oversold.

How is Williams %R different from the stochastic oscillator?

It is the same calculation as the raw fast stochastic %K, flipped onto a negative scale. Williams %R is usually shown without smoothing or a signal line, so it is faster.

Can Williams %R stay overbought for a long time?

Yes. In a strong uptrend the close keeps landing near the period high, so the indicator can stay near zero for many bars.