Skip to content
Menu

Pivot Point Calculator

By Chad Smith · Updated

On this page
  1. How to use it
  2. The formula
  3. Worked example
  4. What the result means
  5. Pivot points and other levels
  6. Common mistakes
  7. Related lessons and tools

A pivot point calculator turns the previous period's high, low and close into a set of support and resistance levels for the current period. It supports three common methods: classic, Camarilla and Woodie. Day traders use daily pivots to frame the session, and swing traders use weekly or monthly ones.

Pivot point calculator

Pivot levels by method
LevelClassicCamarillaWoodie
R4—1.0975—
R31.10631.0948—
R21.10071.09381.1010
R11.09631.09291.0970
P1.0907—1.0910
S11.08631.09111.0870
S21.08071.09021.0810
S31.07631.0893—
S4—1.0865—

Use the previous period's high, low and close (daily pivots use yesterday's candle).

How to use it

  1. Choose the method: classic, Camarilla or Woodie.
  2. Enter the previous period's high, low and close. For Woodie, the calculator also uses the current open if you enter it.
  3. Read the pivot point (P), the resistance levels (R1 to R3 or R4) and the support levels (S1 to S3 or S4).
  4. Mark them on your chart or use them for alerts.

The formula

Classic (floor) pivots

P  = (High + Low + Close) ÷ 3
R1 = 2P − Low          S1 = 2P − High
R2 = P + (High − Low)  S2 = P − (High − Low)
R3 = High + 2(P − Low) S3 = Low − 2(High − P)

Camarilla

Range = High − Low
R4 = Close + Range × 1.1 ÷ 2    S4 = Close − Range × 1.1 ÷ 2
R3 = Close + Range × 1.1 ÷ 4    S3 = Close − Range × 1.1 ÷ 4
R2 = Close + Range × 1.1 ÷ 6    S2 = Close − Range × 1.1 ÷ 6
R1 = Close + Range × 1.1 ÷ 12   S1 = Close − Range × 1.1 ÷ 12

Woodie

P  = (High + Low + 2 × Close) ÷ 4
R1 = 2P − Low          S1 = 2P − High
R2 = P + (High − Low)  S2 = P − (High − Low)

Worked example

This is an illustrative example with simple numbers.

Yesterday's high was 1.1050, the low was 1.0950 and the close was 1.1020.

Classic:
P  = (1.1050 + 1.0950 + 1.1020) ÷ 3 = 1.1007
R1 = 2 × 1.10067 − 1.0950 = 1.1063
S1 = 2 × 1.10067 − 1.1050 = 1.0963
R2 = 1.1007 + 0.0100 = 1.1107
S2 = 1.1007 − 0.0100 = 1.0907

Camarilla:
R3 = 1.1020 + 0.0100 × 1.1 ÷ 4 = 1.10475
S3 = 1.1020 − 0.0100 × 1.1 ÷ 4 = 1.09925

What the result means

The pivot point acts as a rough balance level for the session. Price trading above it is often read as a bullish bias, and below it as a bearish one. The support and resistance levels mark areas where traders may expect a pause or reversal, or where a break could signal a stronger move.

Camarilla levels are tighter. A common approach is to look for reversals at R3 and S3 and for breakouts beyond R4 and S4. Classic levels are wider and are often used for targets during trending days.

Pivot points and other levels

Pivots are most useful when they agree with other evidence. A classic S1 that sits on yesterday's low, a round number or a Fibonacci level is more likely to attract orders than one sitting in empty space. On news days, price can run through several pivot levels without pausing, so look at the economic calendar before you trade them. Pivots also tend to work differently in trending and ranging markets: in a range, the outer levels often hold; in a trend, price may only pause briefly at each one.

Common mistakes

  • Using inconsistent session times. Pivots from different closing times give different levels.
  • Treating levels as exact. Price often reacts a few pips before or beyond a level.
  • Trading every touch. Pivots are more reliable when they line up with other support or resistance.
  • Ignoring the day's context. On major news days, price can move through several levels without pausing.
  • Using the wrong period. Daily pivots on a weekly chart, or weekly pivots on a 1-minute chart, rarely match the trading style.

Frequently asked questions

What are pivot points?

Pivot points are price levels calculated from the previous period's high, low and close. Traders use them as possible support and resistance for the current period.

Which pivot point method is best?

None is best for everyone. Classic pivots are the most widely watched. Camarilla levels sit closer to the price and suit range trading, and Woodie pivots give more weight to the close.

What close should I use for forex?

Forex trades around the clock, so the close depends on the chosen session end. Many traders use the New York close at 5 pm New York time. Use the same convention every day.

Can I use weekly or monthly pivots?

Yes. Use the previous week's or month's high, low and close. Longer-period pivots are often used by swing traders.