Technical Analysis: A Complete Guide to Reading Price Charts
By Chad Smith, Director of Research & Analysis · Updated
On this page
- The core ideas behind technical analysis
- Chart types
- Timeframes
- Trends and market structure
- Support and resistance
- Candlesticks and candlestick patterns
- Chart patterns
- Indicators
- Fibonacci tools
- Divergence
- Price action: reading the chart without indicators
- Gaps
- Volume across different markets
- A worked chart analysis
- Trend-following and mean-reversion
- Putting it together: a rule-based setup
- Testing: backtesting and forward testing
- Technical analysis and risk management
- Technical analysis and fundamentals
- Psychology and chart reading
- Tools and platforms for technical analysis
- Common technical analysis mistakes
- A learning path
- Key takeaways
Technical analysis is the study of past price and volume, mainly through charts, to find trends, key levels and repeatable patterns. Traders use it to decide where to enter, where to place a stop and where to take profit. It does not predict the future, but it gives a structured way to make and test trading decisions. This guide covers the main concepts in order, from chart types to building a rule-based setup, with links to every lesson and library page.
For a lesson-by-lesson path, take our Technical Analysis course. For reference, browse the indicator library, candlestick patterns and chart patterns.
The core ideas behind technical analysis
Technical analysis rests on three working assumptions. First, price reflects the information and expectations of market participants at any moment. Second, prices tend to move in trends that persist for a time. Third, crowd behavior tends to repeat, so similar situations often produce similar reactions.
None of these is a law. Markets can move on new information at any time, trends end, and patterns fail. Technical analysis is best understood as a way of organizing probabilities and risk, not as a forecast. A technical setup tells you where a trade makes sense and where it is proven wrong, which is what you need for risk management.
Technical analysis is also different from fundamental analysis, which studies the economic reasons a price should move. Many traders combine the two. See our fundamental analysis guide.
Chart types
A chart is a picture of price over time. The three most common types are:
- Line chart: connects closing prices. Clean, good for seeing the big picture, but hides intraday range.
- Bar chart (OHLC): shows open, high, low and close for each period as a vertical bar with ticks.
- Candlestick chart: shows the same four prices as a body and wicks, with color showing direction. Most traders use candlesticks because they make the balance between buyers and sellers easy to see.
Variants such as Heikin Ashi smooth candles to make trends clearer, at the cost of hiding exact prices. The lesson Charts and timeframes covers each type.
Timeframes
Every chart has a timeframe: each candle can represent one minute, one hour, one day or any other period. The same market can look like an uptrend on the daily chart and a downtrend on the 15-minute chart. Both are true at their own scale.
Traders choose timeframes based on style:
| Style | Common timeframes |
|---|---|
| Scalping | 1 to 5 minutes |
| Day trading | 5 to 60 minutes |
| Swing trading | 4-hour and daily |
| Position trading | Daily and weekly |
The standard approach is top-down analysis: use a higher timeframe for direction and key levels, and a lower one for timing entries. The lesson Multi-timeframe analysis explains how to avoid conflicting signals.
Trends and market structure
A trend is the general direction of price. In an uptrend, price makes higher highs and higher lows. In a downtrend, it makes lower highs and lower lows. When neither pattern holds, the market is in a range or consolidation.
Reading structure is the foundation of most technical methods:
- Swing points: the highs and lows that define the structure.
- Break of structure: when an uptrend makes a lower low, or a downtrend makes a higher high, the trend may be changing.
- Pullbacks and retracements: temporary moves against the trend.
- Reversals: a change in the trend's direction.
Trendlines connect swing lows in an uptrend, or swing highs in a downtrend, to show the slope. They are subjective, so draw them on clear swing points and treat them as zones rather than exact lines.
The lesson Trends and trendlines covers how to identify and draw trends. Indicators such as ADX, Aroon and DMI measure trend strength.
Support and resistance
Support is a price area where buying has previously stopped a decline. Resistance is an area where selling has stopped a rise. These levels matter because many traders watch them, place orders around them and react when price returns.
Key principles:
- Levels are zones, not exact prices.
- More touches and higher timeframes make a level more significant.
- Role reversal: broken resistance often becomes support, and broken support becomes resistance.
- Round numbers often act as psychological levels.
Other ways to find levels include previous day highs and lows, pivot points, volume profile and Fibonacci retracement levels.
Example: EUR/USD has bounced from 1.0800 three times over two months. Traders treat 1.0780 to 1.0820 as a support zone. A buy near the zone has a clear stop just below it. A daily close well below the zone suggests support has failed and may become resistance.
The lesson Support and resistance covers drawing and trading levels.
Candlesticks and candlestick patterns
Each candle shows the open, high, low and close of a period. The body shows the distance between open and close; the wicks show the extremes. Long wicks suggest rejection of a price; large bodies suggest strong conviction.
Candlestick patterns are short sequences that can signal a possible reversal or continuation. Common ones include:
Single candle
- Doji, dragonfly doji and gravestone doji
- Hammer and hanging man
- Shooting star and inverted hammer
- Marubozu and spinning top
Two candles
- Bullish engulfing and bearish engulfing
- Bullish harami and bearish harami
- Piercing line and dark cloud cover
- Tweezer bottom and tweezer top
Three candles
- Morning star and evening star
- Three white soldiers and three black crows
- Three inside up and three outside down
Candlestick patterns are most useful at meaningful locations, such as support, resistance or a trend pullback. A hammer in the middle of a range means little; a hammer at major support after a pullback in an uptrend means more. The lesson Candlesticks and the full candlestick pattern library explain each one.
Chart patterns
Chart patterns are larger formations built from many candles. They are grouped into reversal and continuation patterns.
Reversal patterns suggest a trend may be ending:
- Head and shoulders and inverse head and shoulders
- Double top and double bottom
- Triple top and triple bottom
Continuation patterns suggest a pause before the trend resumes:
Each pattern has a typical entry (often a breakout of the pattern's boundary), a stop (on the other side of the pattern) and a measured target (often the pattern's height projected from the breakout). Patterns fail regularly, and fakeouts are common, so stops are essential.
The lesson Chart patterns covers how to identify and trade them. The chart pattern library has a page for each.
Indicators
Indicators are calculations based on price, volume or both, plotted on or below the chart. They summarize information, but they are derived from price, so they usually lag it. Indicators fall into four main groups.
Trend indicators
Trend indicators show direction and help filter trades.
- Moving average, including the simple, exponential, weighted and Hull versions
- MACD
- Ichimoku Cloud
- Parabolic SAR and Supertrend
- ADX, Alligator and linear regression channel
See the lesson Moving averages.
Momentum indicators (oscillators)
Oscillators measure the speed of price changes and often move between fixed levels. They help identify overbought and oversold conditions and divergence.
- RSI and Stochastic RSI
- Stochastic oscillator
- CCI and Williams %R
- Momentum, rate of change and awesome oscillator
- Ultimate oscillator and TRIX
In strong trends, oscillators can stay overbought or oversold for a long time, so they work best in ranges or as a timing tool in the trend direction. See the lesson Oscillators.
Volatility indicators
Volatility indicators measure how much price is moving, which helps set stops, targets and position sizes.
- ATR and average daily range
- Bollinger Bands
- Keltner Channels and Donchian Channels
- Standard deviation
See the lesson Volatility tools.
Volume indicators
Volume indicators study how much is being traded. They are most reliable on exchange-traded markets; in spot forex, volume is usually tick volume from the broker.
- OBV and accumulation/distribution
- VWAP and volume profile
- Money flow index and Chaikin money flow
- Force index and ease of movement
Choosing indicators
Use few indicators, and choose them from different groups so they add information rather than repeat it. A common combination is one trend tool, one oscillator and one volatility tool. Two oscillators usually tell you the same thing twice.
Fibonacci tools
Fibonacci retracement levels mark possible pullback zones within a move, often at 38.2%, 50% and 61.8%. Fibonacci extensions project possible targets beyond the move. These levels are most useful when they line up with other support or resistance.
The lesson Fibonacci explains how to draw them on the correct swing points. The Fibonacci calculator computes the levels.
Divergence
Divergence happens when price and an oscillator disagree. If price makes a higher high but the RSI makes a lower high, upward momentum is weakening. This bearish divergence can warn of a pullback or reversal. Bullish divergence is the opposite at lows.
Divergence is a warning, not a signal on its own. It can persist through several swings in a strong trend. Most traders wait for a price confirmation, such as a break of a trendline or a reversal candle, before acting.
Price action: reading the chart without indicators
Price action trading reads the chart directly, using structure, levels and candles, with few or no indicators. Its supporters argue that every indicator is derived from price, so reading price itself removes lag and clutter.
Price action traders focus on a few questions:
- Where are we in the structure? Trending, ranging or transitioning?
- Where are the key levels? Prior highs and lows, broken levels and round numbers.
- How is price behaving at the level? Strong rejection with long wicks, or slow grinding through it?
- How do the candles compare? Expanding candles in the trend direction and small candles on pullbacks suggest a healthy trend. The reverse suggests weakness.
Example: In an uptrend, price pulls back to a broken resistance level on the 4-hour chart. The pullback candles are small and overlapping, then a strong bullish candle closes back above the level with a long lower wick. A price action trader reads this as buyers defending the level and looks to buy with a stop below the wick.
Price action is not a separate system so much as the base layer of all technical analysis. Even indicator-heavy traders benefit from reading structure and levels first.
Gaps
A gap is a space on the chart where no trading took place between one candle's close and the next candle's open. Gaps are common in share markets between sessions and in all markets over weekends. In forex, they mostly appear at the Sunday open.
Traders classify gaps by context. A breakaway gap starts a new move out of a range. A continuation gap appears in the middle of a strong trend. An exhaustion gap appears late in a trend, just before it reverses. Many gaps are partly or fully filled later, but not all, so "gaps always fill" is not a reliable rule.
For risk management, gaps matter because a stop-loss cannot fill inside a gap. It fills at the first available price after the gap, which can be far beyond the stop level.
Volume across different markets
Volume tells you how much trading activity supports a move. On exchange-traded markets such as shares and futures, volume is reported centrally and is reliable. In spot forex and most CFDs, there is no central exchange, so platforms show tick volume: the number of price changes in each period at that broker.
Tick volume often moves in line with real activity, so it can still show when a market becomes busier or quieter. But it is not the same as traded volume, and it differs between brokers. Treat volume-based indicators on forex charts with more caution than the same indicators on a share or futures chart.
A worked chart analysis
The following is an illustrative top-down read of a daily and 4-hour chart.
Weekly. The market has been in an uptrend for months, with higher highs and higher lows. The last weekly candle closed near its high.
Daily. Price recently broke above a resistance level that had capped it for six weeks, then pulled back towards that level. The 50-day moving average is rising and sits just below the level. RSI dipped from above 70 to around 50 on the pullback, which is normal in a trend.
4-hour. The pullback has formed a small bull flag. Volume, where available, fell during the flag.
Plan. Buy a break above the flag's upper line, with a stop below the flag's low and below the broken daily level. Target the measured move of the flag, which also lines up with a Fibonacci extension of the last swing. Skip the trade if a major central bank decision is due before the entry triggers.
Each tool contributes one piece: structure gives direction, the level gives location, the pattern gives the trigger, and volatility and Fibonacci help size the stop and target.
Trend-following and mean-reversion
Most technical strategies fall into one of two broad families. Trend-following strategies assume that a move in progress will continue, so they buy strength and sell weakness. Breakouts, moving average systems and pullback entries in a trend belong here. They usually have a lower win rate and larger winners.
Mean-reversion strategies assume that stretched prices tend to return towards an average, so they buy weakness and sell strength within a range. Oscillator-based range trades and fades from Bollinger Band extremes belong here. They usually have a higher win rate and smaller winners.
Neither family is better. Each works in its own conditions and struggles in the other's. Knowing which family your setup belongs to helps you recognize when the market is unsuitable and stand aside.
Putting it together: a rule-based setup
The real value of technical analysis comes from combining a few tools into rules that can be tested. A complete setup defines:
- Market and timeframe: what you trade and on which charts.
- Context: the trend or range condition required, for example price above the 50-period moving average on the daily chart.
- Location: where you look for trades, such as support, a moving average or a Fibonacci zone.
- Trigger: the exact signal to enter, such as a bullish engulfing candle closing above the zone.
- Stop: where the idea is wrong, such as below the swing low plus a buffer.
- Target and management: fixed target, partial exits or a trailing stop.
- Filters: when not to trade, such as before major news.
Example setup: On the 4-hour chart, trade only when price is above the 50 EMA. Wait for a pullback to a prior resistance level that is now support. Enter on a bullish engulfing candle. Stop below the candle's low, minus a quarter of the ATR. Target the previous swing high, with at least twice the risk available.
Every part can be checked, which means the setup can be backtested and reviewed. The lesson Building a rule-based setup explains this step by step.
Testing: backtesting and forward testing
A setup is only useful if it has a positive expectancy after costs. Backtesting applies the rules to historical data and records the results. Forward testing applies them in real time on demo or with small size.
Good testing practice:
- Write rules precisely before you test.
- Test enough trades to reduce the effect of luck.
- Include realistic spreads, commissions and slippage.
- Test in different market conditions: trends, ranges and volatile periods.
- Avoid overfitting, where rules are tuned so closely to the past that they fail on new data.
The lesson Backtesting covers manual and automated methods. Our demo accounts guide explains forward testing.
Technical analysis and risk management
Technical analysis and risk management work together. Technical analysis decides where the trade idea is wrong, which sets the stop. Risk management decides how much money to risk, which sets the position size.
Example: A setup on GBP/USD has a stop 40 pips from entry. Your plan risks 1% of a USD 5,000 account, or USD 50. Each pip must be worth USD 1.25, so the position is 0.12 lots. The chart sets the stop; the plan sets the size.
Read Stop-loss placement, Position sizing and Risk-reward and win rate. Use the position size calculator and risk-reward calculator. Our risk management guide covers the full framework.
Technical analysis and fundamentals
Even traders who rely on charts need to know when major news is due. Central bank decisions, inflation data and employment reports can move prices through any technical level in seconds. Check the economic calendar before trading.
Many traders use fundamentals for direction and technicals for timing. The lesson Combining fundamental and technical analysis explains how, and our fundamental analysis guide covers the economic side.
Psychology and chart reading
Charts invite bias. Traders see patterns that confirm what they already believe and ignore those that do not. They redraw trendlines to fit a trade they want to take. They switch indicators after a few losses.
Defenses include written rules, screenshots of every trade before entry, and regular review of a trading journal. The Trading Psychology course covers confirmation bias and building a process mindset.
Tools and platforms for technical analysis
Most trading platforms include charting, indicators and drawing tools.
- TradingView: browser-based charting with a large indicator library and social features. See TradingView for trading.
- MetaTrader 4 and MetaTrader 5: built-in indicators, custom indicators and automated strategies. See MetaTrader 4 vs MetaTrader 5.
- cTrader: clean charting and automation. See cTrader vs MetaTrader.
The Trading Platforms course covers setup and features. Calculators such as the pivot point calculator and Fibonacci calculator help with level-based methods.
Common technical analysis mistakes
- Using too many indicators that repeat the same information.
- Trading patterns without regard to location or trend.
- Treating overbought as a sell signal in a strong uptrend.
- Drawing levels and trendlines to fit a trade you already want.
- Ignoring higher timeframes.
- Skipping testing and changing rules after every loss.
- Forgetting costs, especially on short timeframes.
A learning path
- Charts and timeframes
- Candlesticks
- Support and resistance
- Trends and trendlines
- Moving averages
- Oscillators
- Volatility tools
- Fibonacci
- Chart patterns
- Multi-timeframe analysis
- Building a rule-based setup
- Backtesting
Key takeaways
- Technical analysis studies price and volume to time entries, stops and exits.
- Trends, support and resistance are the foundation; indicators and patterns add detail.
- Candlestick and chart patterns matter most at meaningful locations.
- Use few indicators from different groups.
- Combine tools into written rules, then backtest and forward test them.
- The chart sets the stop; your risk plan sets the position size.
Brokers with strong charting to practice on
Put this into practice on a demo account first, with no money at risk.
- Featured broker
Pepperstone4.7 / 5Visit
IC Markets4.9 / 5Visit
GO Markets4.8 / 5Visit
Frequently asked questions
What is technical analysis?
Technical analysis is the study of past price and volume data, mainly through charts, to identify trends, levels and patterns that help decide when to enter and exit trades.
Does technical analysis work?
It is widely used for timing and risk control, but no pattern or indicator predicts the future reliably on its own. Its value comes from defining clear entry, stop and exit rules that can be tested and applied consistently.
What is the best indicator for beginners?
Moving averages are a good start because they show trend direction simply. Many beginners add one oscillator such as the RSI. Fewer, well-understood indicators work better than many.
Which timeframe should I use?
It depends on your trading style. Day traders often use 5 to 60-minute charts, swing traders the 4-hour and daily, and position traders the daily and weekly. Use a higher timeframe for direction and a lower one for timing.
Can I use technical analysis on any market?
Yes. The same principles apply to currencies, stocks, indices, commodities and crypto, as long as the market is liquid enough to form reliable price data. Volume tools are more reliable where exchange volume is available.
Should I combine technical and fundamental analysis?
Many traders do. Fundamentals help explain direction and event risk, while technical analysis helps with timing, stops and targets. Even pure technical traders check the economic calendar to avoid surprises.