Skip to content
Menu

Fibonacci Retracement and Extension Calculator

By Chad Smith · Updated

On this page
  1. How to use it
  2. The formula
  3. Worked example
  4. What the result means
  5. Using Fibonacci with a trade plan
  6. Common mistakes
  7. Related lessons and tools

A Fibonacci calculator works out the retracement and extension levels between a swing high and a swing low. Retracements mark where a pullback inside a trend might pause, and extensions mark possible targets beyond the original move. The calculator saves you from drawing the tool by hand and gives exact prices you can use for orders and alerts.

Fibonacci retracement and extension calculator

Fill in for a three-point extension from the end of the pullback.

Retracement levels
RetracementPrice
23.6%1.0953
38.2%1.0924
50.0%1.0900
61.8%1.0876
78.6%1.0843
Extension levels
ExtensionPrice
127.2%1.1054
161.8%1.1124
261.8%1.1324

How to use it

  1. Choose whether the move is an uptrend (low to high) or a downtrend (high to low).
  2. Enter the swing high and the swing low prices.
  3. For extensions, enter the end of the pullback (the third point) as well, if you use the three-point method.
  4. Read the retracement and extension levels as prices.
  5. Compare them with support and resistance on your chart.

The formula

Range = Swing high − Swing low

Uptrend retracement level  = High − (Range × Ratio)
Downtrend retracement level = Low + (Range × Ratio)

Uptrend extension level    = Low + (Range × Extension ratio)
                             (two-point method)
Downtrend extension level  = High − (Range × Extension ratio)

Three-point extension (uptrend):
  Level = Pullback low + (Range × Ratio)

Retracement ratios: 0.236, 0.382, 0.500, 0.618, 0.786
Extension ratios:   1.272, 1.618, 2.618

Worked example

This is an illustrative example with simple numbers.

EUR/USD rises from a swing low of 1.0800 to a swing high of 1.1000. The range is 0.0200, or 200 pips.

38.2% retracement = 1.1000 − (0.0200 × 0.382) = 1.09236
50.0% retracement = 1.1000 − (0.0200 × 0.500) = 1.0900
61.8% retracement = 1.1000 − (0.0200 × 0.618) = 1.08764

161.8% extension  = 1.0800 + (0.0200 × 1.618) = 1.11236

A trader expecting the uptrend to continue might watch the 1.0900 to 1.0876 area for signs of buying, with an eventual target near 1.1124.

What the result means

The levels are reference prices, not signals. Many traders watch them because others do, which can create reactions around them, but price often moves straight through. The levels become more useful when they line up with something else, such as a previous swing, a round number or a moving average. That overlap is often called confluence.

Extensions are a way to set targets in a trend when there is no obvious resistance above the current price. Like retracements, they are a guide to where a move might slow, not a promise that it will get there. Many traders take partial profits at the first extension and let the rest run with a trailing stop.

Using Fibonacci with a trade plan

A common approach is to wait for price to pull back into the 38.2% to 61.8% zone, look for a reversal signal there, place the stop beyond the swing that started the move or beyond the 78.6% level, and target the previous high or an extension. The calculator gives the prices; the risk/reward calculator then checks whether that stop and target make sense, and the position size calculator sets the lot size.

Common mistakes

  • Choosing swing points to fit a desired level. Pick the obvious swings first, then read the levels.
  • Treating every level as support or resistance. With five or more levels, price is almost always near one of them.
  • Ignoring the trend. Retracement entries make most sense in a clear trend.
  • Using Fibonacci alone. Without confirmation, levels are just lines on a chart.
  • Mixing timeframes carelessly. Levels from a daily swing carry different weight from levels on a 5-minute chart.

Frequently asked questions

Which Fibonacci levels are most used?

The common retracement levels are 23.6%, 38.2%, 50%, 61.8% and 78.6%. Common extension levels are 127.2%, 161.8% and 261.8%. The 50% level is not a Fibonacci ratio but is included by convention.

Which swing points should I use?

Use a clear swing high and swing low that define the move you are measuring. Different traders pick different points, which is one reason Fibonacci levels are subjective.

Do Fibonacci levels predict where price will turn?

No. They mark areas where some traders watch for a reaction. They work best alongside other evidence, such as support and resistance or a candlestick signal.

What is the difference between retracement and extension?

Retracement levels sit inside the original move and suggest where a pullback might pause. Extension levels sit beyond it and are used as possible targets once the trend resumes.